Yorkville Sound M1610 DJ Equipment User Manual


 
19
M1610 SPECIFICATIONS
Number of Channels
10
Mono Channel EQ
Low, Mid, High
Stereo Channel EQ
Low, Mid, High
Channel Effects
All Channels
Monitors Effects
Yes
Balance Controls
Ch. 7 - 10
Pan Controls
Ch. 1 - 6
Channel Overload Protection
Ch. 1 - 6
Inputs - XLR (bal)
8
Inputs - 1/4"
10
Inputs - RCA (unbal)
1 Pair
Mute Switches
Global 1 - 8
Activity / Solo LED
Trim Set Ch. 1 - 6
Clip /Mute LED
All Channels
Phantom Power
48V + LED Indicator
Internal Effects
Digital 16 Bit; 255 Effects
Auxiliary Sends
Effect - Monitor
Effects Send
Yes
Effects Return
Internal
Effects Return to Main
Yes
Effects Return to Monitor
Yes
Reverb / Effects Footswitch
Yes
Record Outputs
Stereo RCA Pair
Max Gain to Line Out -Mic Input (dB)
84
Max Gain to Line Out -Line Input (dB)
82
Master EQ -1 (type /Channels /Range - dB)
Graphic 9 band (160hz-6.3khz) +2 band Shelving
Monitor EQ -1 (type /Channels /Range - dB)
Graphic 9 band (160hz-6.3khz) +2 band Shelving
Main Outputs ( Line Level)
2 x 1/4inch TRS
Main Amp Inputs (Line Level)
2 x 1/4inch TRS
Monitor Outputs (Line Level)
1 x 1/4inch TRS
Outputs - Amp A - 1/4" Jacks
2
Outputs - Amp A - Speakon 4-pin
1
Outputs - Amp B - 1/4" Jacks
2
Outputs - Amp B - Speakon 4-pin
1
Mixer - Signal to Noise Ratio (dB)
101
Mixer - Frequency Response (Tone and EQ Flat,+/-2dB)
20 - 20,000
Mixer - Input Referred Noise to line out, @ 150 Ohms (dBv)
-119
Mixer THD (Main out w/ -10dB input)
0.01%
Amp A - Power Output @ 8 Ohms (0%1"THD, 1kHz)
600
Amp A - Power Output @ 4 Ohms
800
Amp A - Power Output -other
600 @ 2 ohms
Amp B - Power Output @ 8 Ohms (0%1"THD, 1kHz)
600
Amp B - Power Output @ 4 Ohms
800
Amp B - Power Output -other
600 @ 2 ohms
THD - 1kHz (dB)
0.10%
THD - 20Hz-20kHz (dB)
0.50%
Hum and Noise (un / Aweight -dB)
-101
Typical crosstalk -1 kHz (dB)
better than -60db
Input Impedance - Bal/Unbal (Ohms)
20k / 10k ohms
Input Sesitivity (Vrms Sine)
1.4
CMRR @ 60Hz (min/typ)
-37db / -60db
Max Votage Gain (dB)
32
Power Consumption
6.4A @ 60Hz / 3.3A @ 50Hz
Protection
Thermal, Short Circuit, Impedance Overload
Cooling
2 x 80mm Fans
Transformer Type
Toroidial
Finish
Grey and Black Powder Coat
Chassis Construction
Steel and Aluminum
Rackmount
Yes (Kit Available)
Other Features
Tiltback or Upright Wedge Angles
Dimensions (DWH, inches)
11.1 x 18.6 x 11
Dimensions (DWH, cm)
28 x 47 x 28
Weight (lbs/kg)
29 / 13