3-15
Defining Port PoE
The Port PoE Setup Page allows the network manager to configure port PoE settings.
Click Port > PoE > Setup. The Port PoE Setup Page opens.
Figure 3-18 Port PoE Setup Page
The Port PoE Setup Page contains the following fields:
Table 3-13 Port PoE Setup Page item description
Item Description
PoE State
Defines the port PoE state. The possible values are:
z Enable: Enables the port for PoE.
z Disable: Disables the port for PoE.
PoE Mode for selected
& enabled ports
Defines the PoE mode for the selected port.
Guarantee Power
Summary
Displays guaranteed and total PoE power:
z Total PoE Available: The total amount of PoE power that can be
provided by the switch.
z Guarantee PoE: The maximum amount of PoE power that has been
guaranteed for selected ports. This value is defined by the number of
ports you have set to Guarantee.
z Remaining (Available - Guarantee): The minimum amount of
non-guaranteed PoE power left over after allocating the Guarantee
PoE power. This value is a guideline for assigning guarantee ports. The
actual amount of power used and available is displayed on the Port
PoE Summary page.
Selected Ports Displays the PoE configuration for the selected ports.
Viewing PoE
The Port PoE Summary Page displays the switch and port PoE settings.
Click Port > PoE. The PoE Summary Page opens.
