3-64
Item Description
IEEE 802.3
The IEEE 802.3 defined LLDP TLVs supported by the
device include the following:
z MAC/PHY: The rate, duplex mode, and speed
auto-negotiation state of the port.
z POE Power: Power supply capability of the port.
z Link Aggregation: Indicates the support of the port for
link aggregation, and the aggregation status (whether
the link is in an aggregation).
z Maximum Frame Size: Supported maximum frame
size. Currently, it takes the MTU of the port.
If you check the option of All IEEE802.3, all the above
IEEE802.3 organizationally specific TLVs will be sent
within LLDPDUs
LLDP-MED
The MED related LLDP TLVs include the following
z Capability: MED device type of the device, and types
of LLDP MED TLVs that can be encapsulated in
LLDPDUs.
z Network Policy: VLAN ID of the port, supported
applications (voice and video, for example), and
priority and policy of each application.
z Power Over Ethernet: Power supply capability of the
port.
z Inventory: Inventory information of the local device,
including Hardware Revision TLV, Firmware Revision
TLV, Software Revision TLV, Serial Number TLV,
Manufacturer Name TLV, Model Name TLV, Asset ID
TLV used for inventory management and asserting
tracking.
If you check the option of All LLDP-MED to encapsulate
all LLDP-MED TLVs supported by the device
Viewing LLDP Information
Viewing Global LLDP Information and Received LLDP Information
Click Device > LLDP > Global Summary. The Global LLDP Information and Received LLDP
Information Page opens.
Figure 3-71 Global LLDP Information and Received LLDP Information Page
The Global LLDP Information and Received LLDP Information Page contains the following fields:
