12 CHAPTER 1: INTRODUCING THE OFFICECONNECT MANAGED SWITCH 9 AND SWITCH 9FX
About the Switch The Switch is a 10/100 Mbps Ethernet Switch, which consists of:
■ 8 10BASE-T/100BASE-TX ports
and either:
■ One 10BASE-T/100BASE-TX/1000BASE-T (10/100/1000) port or
■ One 100BASE-FX LC port and one SFP port
The 100BASE-FX and SFP port is a combination port. When an SFP
module is inserted it has priority over the 100BASE-FX port of the same
number. The corresponding 100BASE-FX port is disabled when an SFP
module is present.
The Switch supports Power over Ethernet on ports 1, 2, 5 and 6. If you
plug in a compatible (IEEE 802.3af compliant) device, it will be
automatically detected and power supplied to it. Power over Ethernet is
enabled on these ports by default.
Summary of
Hardware Features
Table 3 summarizes the hardware features that are supported by the
Switch.
Table 3 Hardware features
Feature Switch
MAC Addresses ■ Up to 8000 supported
■ Up to 64 static entries
Auto-negotiation Supported on all ports
Auto MDI/MDI-X Supported on all RJ-45 ports
Forwarding Modes Store and Forward
Duplex Modes Half and full duplex on all ports
Traffic Prioritization Supported (using the IEEE Std 802.ID, 1998 Edition):
4 queues per port
Power over Ethernet Supported on ports 1, 2, 5 and 6
Ethernet/Fast Ethernet
Ports
Auto-negotiating 10BASE-T / 100BASE-TX ports
Ethernet/Fast Ethernet/
Gigabit Ethernet Ports
1 auto-negotiating 10BASE-T / 100BASE-TX /
1000BASE-T port
SFP Port 1 auto-negotiating SFP port on Switch 9 FX
Fiber-Optic Port 1 auto-negotiating 100BASE-FX port on Switch 9 FX
Mounting Wall mounting or stand-alone mounting
