Chapter 2 Installing ReadySystem 1U Options
ReadySystem 1U Users Guide 9
8. Push the compact flash card into the opening until it firmly seats into the socket and mates with
the pins. See Figure 2-2.
RdySy1U_06a
Lip or
Catch Edge
Pin-1
Indicator
Keyed
Slots (2)
Figure 2-2. Installing Compact Flash Card
9. If your application or environment requires protection of the compact flash card, for security or
EMI protection, you can re-install the protective cover over the compact flash card.
See Figure 2-1.
Reconnecting the protective cover will provide full EMI protection.
10. Refer to the specific ReadyBoard documentation for any required jumper settings for the compact
flash card, before restoring power to the ReadySystem 1U.
CAUTION Depending on BIOS Setup, some ReadyBoard products will power
on as soon as you connect DC power to the system.
Removing the Compact Flash Card
To remove the compact flash card from the ReadySystem 1U through the enclosure opening, simply
reverse the installation procedure and follow all of the safety precautions listed.
