KL3116 / KL3116T User Manual
26
LCD Adjustment Settings
The LCD OSD adjustment settings are described in the table below:
LCD Power Button
Press the LCD Power button to turn the LCD monitor on and off. The button
lights up when the LCD monitor is Off. When the LCD monitor is On, the
button light turns off.
Note: This function only affects the monitor. It does not affect the KVM
switch module.
Setting Description
Brightness Adjusts the background black level of the screen image.
Contrast Adjusts the foreground white level of the screen image.
Phase If pixel jitter or horizontal line noise is visible on the display, your
LCD may have the wrong phase setting. Adjust the phase setting
to eliminate these problems.
Clock If vertical banding is visible on the display, your LCD may have
the wrong clock setting. Adjust the clock setting to eliminate
vertical banding.
H-Position Positions the display area on the LCD panel horizontally (moves
the display area left or right).
V-Position Positions the display area on the LCD panel vertically (moves
the display area up or down).
Color Temperature Adjusts the color quality of the display. You can adjust the
“warmth” value, color balance, etc. The Adjust Color selection
has a further submenu that lets you fine tune the RGB values.
Language Selects the language that the OSD displays its menus in.
OSD Duration Lets you set the amount of time that the OSD displays on the
screen. If there is no input for the amount of time you choose, the
OSD display turns off.
Reset Resets the adjustments on all menus and submenus to their
factory default settings.
kl3116-3116t.book Page 26 Wednesday, June 1, 2011 1:28 PM
