Chapter 3. Basic Operation
29
Touch Screen Icon
Use the Touch Screen Icon for port selection, as well as mouse right button
and scroll button emulations. It appears on the right side of the screen and
performs the following functions:
Touch Panel Port Selection icon – press this icon to invoke full
screen OSD for port selection.
Note: The Touch Screen Icon is hidden while you are selecting the port. After
selecting a port, it becomes visible once more.
Mouse Right Button Emulation icon – press this icon to enable
mouse right-click emulation. See Mouse Emulation Control, page 29 for
more information.
Mouse Scroll Button Emulation icon – press this icon to enable
mouse scrolling wheel emulation.This allows you to scroll down/up the
screen.
Close / Exit Touch Screen Icon - press this to hide the Touch
Screen Icon. To bring it back, touch the screen with your pointer finger
and slide it all the way to the right until the Touch Screen Icon re-appears.
Mouse Double Click Emulation
To execute an application on the LCD touchscreen, you can employ two ways:
Normal double click – to run an application, press the application’s icon
twice (i.e., double click); this is the same as double clicking a mouse when
opening or running files/applications on a computer
Long click – press the application’s icon for longer than 1 second
Enabling / Disabling the Touch Screen Icon
The Touch Screen Icon is enabled by default. You can enable or disable it
through the OSD menu. Refer to F3: SET, page 36 for the OSD instructions.
Mouse Emulation Control
Use this function to display / execute the mouse’s right-click properties by
pressing the touchscreen. The default setting is disabled. To enable, do any of
the following methods:
kl3116-3116t.book Page 29 Wednesday, June 1, 2011 1:28 PM
