KL3116 / KL3116T User Manual
54
Computer Keyboard / Mouse Reset
If the keyboard or mouse cease to function on the computer connected to the
currently selected port, you can perform a keyboard / mouse reset on the
computer. This function is essentially the same as unplugging and replugging
the keyboard and mouse on the target computer. To perform a computer
keyboard / mouse reset, key in the following hotkey combination:
1. Invoke hotkey mode (see page 48).
2. Press [F5].
After you press [F5] you automatically exit Hotkey mode and regain keyboard
and mouse control on the computer. If you fail to regain keyboard / mouse
control on the computer after pressing [F5], perform a system reset. For more
information see Lock LEDs & Reset Switch, page 7.
Hotkey Beeper Control
The beeper (see ACTIVATE BEEPER, page 41) can be hotkey toggled on and
off. To toggle the beeper, key in the following hotkey combination:
1. Invoke hotkey mode (see page 48).
2. Press [B].
After you press [B], the beeper toggles on or off. The command line displays
Beeper On or Beeper Off for one second; then the message disappears and you
automatically exit hotkey mode.
kl3116-3116t.book Page 54 Wednesday, June 1, 2011 1:28 PM
