A SERVICE OF

logo

10.0
Seed Calibration
Hopper Flow Door handle
1. Close the HCBT Hopper Flow Door Handle.
Hopper Flow Door handle
2. Then open the HCBT Hopper Flow Control Handle
about 1-3/4”.
CLOSED
OPEN 1-3/4”
Determine the feed rate of seed.
You will need a watch or stopwatch, scale, calibrated
beaker and a collection bin for the Calibration process.
HCBT Inlet Hopper
3. Position your Seed Source
(i.e. bulk bag, conveyer with holding bin, holding bin, etc.
with an OPEN/CLOSE seed gate) above the HCBT Inlet
Hopper.
Continued...
SEED SOURCE
Seed Source needs to have an
OPEN/CLOSE Seed Gate to control
the seed ow to the HCBT Inlet
Hopper