10
SERVSWITCH™ SUMMIT
1.2 Initial Administrative Testing
To verify that an attached computer can be viewed and controlled through the
ServSwitch Summit system, take these steps:
1. When you first power ON the ServSwitch Summit Base Unit, an attached
USM, and the USM’s attached monitor, a Login Menu will be displayed on
the monitor, as shown in Figure 1-2. Type admin (all lowercase) in the User
Name field and press [Enter]. Type blackbox (all lowercase) in the
Password field and press [Enter].
NOTE
The factory-default user names are user01 through up to user15
(depending on the model of the Base Unit) for regular users and admin
for the admin user. User names are not case-sensitive. By default, a
password is required only for the admin user, and that password is
blackbox. Passwords are case-sensitive.
Figure 1-2. The Login Menu for a KV1502A.
2. The monitor will display an On-Screen User Interface (OSUI) Selection
Menu (shown in Figure 1-3) with the channel of the connected CPU
displayed in green. (It will have no default name—the Name field will be
blank.)
3. Use the up- and down-arrow keys on the user station’s keyboard to move the
highlight to the green computer channel and press [Enter].
4. Normal computer access and operation indicates a successful connection.
A video-gain adjustment is available to focus the video image, which can be
especially useful if you’re using an LCD flat-panel monitor. To make this
adjustment, activate the OSUI (if you haven’t done so already) by rapidly pressing
the keyboard’s [Scroll Lock] key twice. Use the “+” and “-” (plus- and minus-sign)
keys on the keyboard’s numeric keypad to adjust the video image until it appears
to be in focus.
Please Login ServSwitch Summit
Device ID: Summit 8x32
User Port: 1
User Name:
Password:
Enter Name and Password
