A SERVICE OF

logo

Open as PDF
next previous
57
APPENDIX C: Using a KV1519A to Access a Local CPU
Appendix C: Using a KV1519A to
Access a Local CPU
If you have a local PC CPU that you want only the user(s) at a certain user station
to be able to access, but you want that user station to be able to access the CPUs
attached to the ServSwitch Summit system as well, you can do this by inserting a
KV1519A dual-access CIM between a USM and a Base Unit, as shown in Figure C-1.
Figure C-1. A Summit system that uses a KV1519A to support a local CPU.
To do this for a given user station, take these steps:
1. If you haven’t already done so, install your Summit system as described in
Chapter 4.
2. Take the cable that connects the user station’s USM to the Base Unit and
disconnect it from the Base Unit’s user port.
USMs and user stations
with no access to the
local CPU
USM and
user station
with access
to the local
CPU
KV1519A
CIM
Base
Unit
Local
PC
CIMs
Other
CPUs