A SERVICE OF

logo

Open as PDF
next previous
724-746-5500 | blackbox.com
Page 59
Chapter 6: Web-Based Browser Management
Figure 6-45.
Chain Setting
Chain Protocol:
1. Click “Enable” to enable Chain Protocol for ports.
2. Submit: Click on the “Submit” button when you finish Chain Protocol setting.
Global Setting:
1. VLAN (1-4094, default: 1): Click in the “VLAN” textbox and specify a VLAN ID number from 1–4094.
2. Priority (1-255, default: 128): Set the Switch priority for a running chain protocol. A switch with lower priority will run as the
Master (forwarding) port.
3. Timeout Count (3-255, default: 5): Set the Switch timeout count for running chain protocol.
Chain recovery time = (Chain Timeout Count – 1) x 200 ms.
Default Chain recovery time = (5 – 1) x 200 ms = 800 ms.
4. Storm Control (broadcast and multicast): Choose “Enable” or “Disable” from the “Storm Control (broadcast and multicast)”
drop-down list to enable or disable Storm Control (broadcast and multicast) for Chain Protocol setting.