142
Modem 34336
C.3 AT PROFILES Screen
From the AT PROFILES screen you can select a Hayes mode configuration
profile (either 0 or 1). Only part of the profile can be displayed at one time.
The selected profile is used as the active configuration and is also designated
as the default user profile.
• Press pushbutton 1 to select profile 0.
• Press pushbutton 2 to select profile 1.
• Press pushbutton 3 to toggle between profile 0 and profile 1 as the
default. You can achieve the same effect by issuing the &Y command
(&Y0 or &Y1).
Figure C-3. Selecting a Profile.
NOTE
Refer to Table 5-1, Hayes Compatible Commands, for an explanation of
the commands represented in this diagram.
ATbeflmqvxy AT&cdgjlpqrsx s00 s18 s25 s26 AT\abcdeh kmnpq t vx
010210141 1210000000 001 000 005 001 3150101630323300100
AT Commands
AT\ Commands
(most are for V.42 options)
AT& Commands
S Registers
AT PROFILES
0 1 &Y0
12
3
ATbeflmqvxy AT&c
010210141 1
12
3
Increase
the value of
the blinking
character
by one
