29
CHAPTER 5: Operation
5.2 Displaying Plug Status
The Status screen displays the on/off state and selected parameters for the
switched plugs. To display the Status screen, type /S and press [Enter].
NOTE
Although the /S command is available in both user and system mode,
the System Status screen includes more information than the User
Status screen.
When the system mode is active, the /S command will produce the screen shown
in Figure 5-1. It lists status and parameters for both switched plugs, console port
parameters, and modem command strings.
NOTE
In system mode, the /S command will also accept an argument which
will display the user password for each plug. To display plug
passwords, access the system mode, type /SP, and press [Enter].
Figure 5-1. System Status screen (passwords hidden).
Dual-Port Network Power Switch v1.00 Site: BLACK BOX CORPORATION
Plug Name Status Boot Delay Password Default
1 ROUTER_A ON 15 Sec (defined) ON
2 ROUTER_B OFF 15 Sec (defined) OFF
Modem Init. String: ATE0M0Q1&C1&D2S0=1
Modem Disc. String: +++ATZ
Communication Settings: 9600,N,8,1
Command Echo: OFF
Disconnect Timeout: 30 Min
Command Confirmation: ON
Automated Mode: OFF
Button Mode: ON
“/H” for Help
