A SERVICE OF

logo

Open as PDF
next previous
11
CHAPTER 2: Introduction
2.3 Front Panel
As shown in Figure 2-1, the Dual-Port Network Power Switch front panel includes a
series of LED indicators. Descriptions of the LEDs are listed below.
Figure 2-1. Front panel.
1. ON: Lights when AC power is applied to the Dual-Port Network Power Switch.
2. RDY: Flashes when the Dual-Port Network Power Switch is ready to receive
commands.
3. RXD: Lights when the Dual-Port Network Power Switch receives commands.
4. DCD: Lights when the modem port detects the carrier.
5. NET: Lights when a Telnet session is in progress.
6. Plug indicators and manual control buttons: An on/off indicator and manual
control button for each switched plug. To manually switch a plug on or off,
press and hold the appropriate manual control button for one second; the
corresponding plug will be toggled on or off.
NOTE
If desired, you can disable the manual control buttons as described in
Section 4.4.
12345 6