VEZ-400 Mini PTZ Dome On-Screen Display (OSD) Menu | en 49
Bosch Security Systems, Inc. User Manual F.01U.252.635 | 2.0 | 2011.09
1. From the MAIN MENU, select DOME MOTION. The
submenu DOME MOTION appears.
2. Select MOTION SETUP. The screen MOTION SETUP
appears.
3. Select the option "Prop. Pan/Tilt."
4. Select the value "On" to allow proportional pan/tilt when
Zoom is set to manual.
5. Select the option "Auto Flip." This is a function that
automatically reverses the image when the zoom module
passes through the top of the tilt point (90 degrees).
6. Select the value "On".
7. Select the option "Over Tilt." This function restricts the
vertical view angle to a specific operational range to
mechanically restrict certain angles.
8. Select the appropriate value:
–Mode 0
–Mode 1
–Mode 2
Each Mode restricts the vertical minimum tilt to prevent
horizontal block on the view from the camera’s cover.
9. Save the settings.
7.6.3 Home Action
The Home Action sets the function that the camera should
perform after the joystick controller has been idle for
predetermined amount of time. The Home Action can be set to
a preset, a tour, or auto scan. The dwell time can be set from 1
second to 60 seconds and from 1 minute to 60 minutes.
MOTION SETUP
PROP PAN/TILT
AUTO FLIP
OVER TILT
SAVE
BACK
