PERIODIC MAINTENANCE CHART
INITIALINSPECTION10HOR30DAYSOR200KM(125mi)
(To be performed by an authorized Can-Am dealer. Theinitial
maintenance is very important and must not beneglected.)
25 H OR 500 km (310 mi)
50 H OR 1000 km (620 mi)
100 H OR 1 YEAR OR 2000 km (1250 mi)
200 H OR 2 YEARS OR 4000 km (2485 mi)
A: ADJUST
C: CLEAN
I: INSPECT
L: LUBRICATE
R: REPLACE
T: PROCEED WITH TASK
TO BE PERFORMED BY
PART/TASK LEGEND
FUEL SYSTEM
Air filter/air injection valve filter
I,
C
(4)
R
(4)
Customer
Fuel filter I I R Dealer
Fuel lines, connections and fuel tank
pressure test
I I Dealer
Carburetor
(1)
A A Dealer
(1) Emission-related component.
(4) More often under severe use
such dusty area, sand, snow,
wet or muddy conditions.
ELECTRICAL SYSTEM
Spark plug
(5)
IRCustomer
Ignition timing I I Dealer
Battery connections I I Customer
Wiring harnesses, cables and lines I I Dealer
Condition of ignition switch, engine
startbuttonandenginestopswitch
(2)
IICustomer
Condition of lighting system
(HI/LO intensity, brake lamp, headlamp
aiming, etc.)
(2)
IICustomer
(2) Pre-ride inspection item.
(5)Makesurethesparkplugis
correctly gapped.
DRIVE TRAIN
Drive chain lubrication EVERY RIDE Customer
Drive chain slider condition EVERY RIDE Customer
Drive chain adjustment EVERY RIDE Customer
Drive chain sprockets I I Customer
Wheel bearings I Customer
—
_____________________
95
