Troubleshooting
54
Printer driver is not
installed properly
Uninstall then reinstall the printer driver.
1. Click Start
StartStart
Start, and select All Programs
All Programs All Programs
All Programs (or Programs
ProgramsPrograms
Programs), Canon i70
Canon i70Canon i70
Canon i70, and Uninstall
UninstallUninstall
Uninstall.
2. Follow the on-screen instructions to uninstall driver.
3. Follow the procedures described in the
Easy Setup Instructions
and reinstall
the printer driver.
“Error No.: X202”
Not enough
memory
Increase available memory by closing any other applications currently running.
“Error No.: X203”
Printer driver fault Uninstall, then reinstall printer driver.
Refer to the
User’s Guide
for instructions on how to uninstall the printer driver.
“Error No.: X300”
Printer not ready If the POWER
POWERPOWER
POWER lamp is off, turn the printer on.
If the POWER
POWERPOWER
POWER lamp is flashing green, the printer is initializing. Wait until the
POWER
POWERPOWER
POWER lamp stops flashing.
Printer not properly
connected
Ensure the printer is securely connected to the computer.
Printer not selected
in chooser
1. From the Apple
AppleApple
Apple menu, select Chooser
ChooserChooser
Chooser.
2. Click the i70
i70i70
i70 icon and ensure that the i70 is selected as the target connection.
If not, select it.
A message asking
whether the ink tank
has been replaced
appears
If the ink tank has
been replaced with
a new one
Click Yes
YesYes
Yes or OK
OKOK
OK to reset the ink counter.
See "Resetting the Ink Counter
Resetting the Ink CounterResetting the Ink Counter
Resetting the Ink Counter" on page 44.
The ink tank has
been removed but a
new ink tank has
not been installed
Click Cancel
CancelCancel
Cancel on the dialog box described above.
You can choose the option to disable the display of this confirmation message.
1. Ensure the printer is on and open the Printer Properties
Printer PropertiesPrinter Properties
Printer Properties dialog box.
2. On the Maintenance
MaintenanceMaintenance
Maintenance tab, click Low Ink
Low InkLow Ink
Low Ink Warning Setting
Warning SettingWarning Setting
Warning Setting.
3. Clear a check box of Display a confirmation message of Ink tank replacement
Display a confirmation message of Ink tank replacementDisplay a confirmation message of Ink tank replacement
Display a confirmation message of Ink tank replacement
and click Send
SendSend
Send.
1. Ensure the printer is on and open the Page Setup
Page SetupPage Setup
Page Setup dialog box.
2. Click Utilities
UtilitiesUtilities
Utilities to open the Printer Utility
Printer UtilityPrinter Utility
Printer Utility dialog box.
3. Select Remaining Ink level Setting
Remaining Ink level SettingRemaining Ink level Setting
Remaining Ink level Setting from the pull-down menu and click Low
Low Low
Low
Ink Warning Setting
Ink Warning SettingInk Warning Setting
Ink Warning Setting.
4. Clear a check box of Display a confirmation message of Ink tank replacement
Display a confirmation message of Ink tank replacementDisplay a confirmation message of Ink tank replacement
Display a confirmation message of Ink tank replacement
and click Send
SendSend
Send.
Problem Possible Cause Try This
Note If you are using switching hub or other device, disconnect
the printer and reconnect it directly to the computer and try
printing again.
If successful, the problem may have been with the device.
There could also be a problem with the cable(s). Replace the
cable(s) and try printing again.
Note If the problem persists, delete all unnecessary documents
from the Extensions and Control Panels folder.
US_i70_QSG.book Page 54 Monday, December 16, 2002 5:48 PM
