show vrm vdevices
Voice over IP for the Cisco AS5800 53
loadable codec bitmap Represents the loadable codec bitmap for the loadable CODECs. Possible
field values are:
• CC_CAP_CODEC_G711U = 0x0001
• CC_CAP_CODEC_G711A = 0x0002
• CC_CAP_CODEC_G729IETF = 0x0004
• CC_CAP_CODEC_G729a = 0x0008
• CC_CAP_CODEC_G726r16 = 0x0010
• CC_CAP_CODEC_G726r24 = 0x0020
• CC_CAP_CODEC_G726r32 = 0x0040
• CC_CAP_CODEC_G728 = 0x0080
• CC_CAP_CODEC_G723r63 = 0x0100
• CC_CAP_CODEC_G723r53 = 0x0200
• CC_CAP_CODEC_GSM = 0x0400
• CC_CAP_CODEC_G729b = 0x0800
• CC_CAP_CODEC_G729ab = 0x1000
• CC_CAP_CODEC_G723ar63 = 0x2000
• CC_CAP_CODEC_G723ar53 = 0x4000
• CC_CAP_CODEC_G729 = 0x8000
fax codec bitmap Represents the fax codec bitmap. Possible field values are:
• FAX_NONE = 0x1
• FAX_VOICE = 0x2
• FAX_144 = 0x4
• FAX_96 = 0x8
• FAX_72 = 0x10
• FAX_48 = 0x20
• FAX_24 = 0x40
Logical Device (Tag) Tag number or the DSP number on that VFC.
Module # Number identifying the module associated with a specific logical device.
DSP# Number identifying the DSP on the VFC.
C_Ac Number of active calls on identified DSP.
C_Busy Number of busied-out channels associated with identified DSP.
C_Rst Number of channels in the reset state associated with identified DSP.
C_Bad Number of defective (“bad”) channels associated with identified DSP.
Total active call channels Total number of active calls.
Total busied out channels Total number of busied-out channels.
Total channels in reset Total number of channels in reset state.
Total bad channels Total number of defective channels.
Table 6 show vrm vdevice summary Field Descriptions (continued)
Field Description
