GNS 430(A) Pilot’s Guide and Reference
190-00140-00 Rev. P
7-10
SECTION 7
WPT PAGES
Airport Approach Page Options
The following options are available for the Airport
Approach Page, by pressing the MENU Key:
‘Load into Active FPL?’ allows the pilot to load the
selected approach into the active ight plan without
activating it. This performs the same operation as selecting
‘Load?’ from the Procedures Page ‘Select Approach?’
option. See Section 6.1.
To load an approach from the Airport
Approach Page:
Figure 7-20 Airport Approach Page
1) Select the desired approach and transition
using the steps outlined in Section 6.1 (Figure
7-20).
2) Press the MENU Key to display the Airport
Approach Page Menu.
3) Turn the large right knob to highlight ‘Load
into Active FPL?’ and press the ENT Key (Figure
7-21).
Figure 7-21 Airport Approach Page Menu
4) The Active Flight Plan Page appears. Press the
FPL Key to return to the Airport Procedures
Page.
‘Load and Activate?’ allows the pilot to load the selected
approach into the active ight plan and activate navigation
guidance to the approach transition (Section 6.1).
To load and activate an approach from the Airport
Approach Page, follow the steps above, but select ‘Load
and Activate?’ in step 3.
