GNS 430(A) Pilot’s Guide and Reference
190-00140-00 Rev. P
10-26
SECTION 10
AUX PAGES
To display the map datum:
1) Select ‘Position Format/Map Datum’ from the
Setup 1 Page, using the steps described at the
beginning of this section.
2) The WGS 84 map datum is displayed, this field
cannot be changed.
Figure 10-66 WGS 84 Map Datum
Setup 1 Page: Date/Time
To display local time or UTC:
1) Select ‘Date/Time’ from the Setup 1 Page, using
the steps described at the beginning of this
section.
2) The flashing cursor highlights the time format
field (Figure 10-67). Turn the small right knob
to display a window of available time formats:
Local 12hr, Local 24hr, or UTC.
Figure 10-67 Time Format Window
3) Continue turning the small right knob to select
the desired time format.
4) Press the ENT Key to accept the selection.
To set the local time:
1) Select ‘Date/Time’ from the Setup 1 Page, using
the steps described at the beginning of this
section.
2) Turn the large right knob to highlight the time
offset field (Figure 10-68).
Figure 10-68 Time Offset Field Highlighted
3) Use the small and large right knobs to enter
the desired offset, beginning by entering a
minus (-) or plus (+) sign to indicate whether
the offset is behind UTC or ahead of UTC. In
the United States, all local time offsets use
minus, or behind UTC.
4) Press the ENT Key to accept the selected
offset.
