19
Reference
Map Page Options
• Measure — allows you to measure the bearing and distance between any two points on the map
display.
To measure the BRG/DIS between two points:
1. Press the ‘Measure Distance’ SOFT KEY. An on-screen pointer will appear on the map display at your
present position with ‘ENT REF’ below it.
2. Move the cursor to the desired reference point (the point that you want to measure from) and press
ENTER/MARK.
3. Move the cursor to the point that you want to measure to. The bearing and distance from the reference
point and cursor coordinates will be displayed in the data window at the top of the display. Press the
QUIT key to fi nish.
• Set Up Map— allows you to confi gure the map display to your preferences, including map detail, map
orientation, automatic zoom, and various map items and points. The map set up option uses a ‘fi le tab’
feature, making it easier to organize the various settings for ease of use. The following table lists the fi le
tabs and the settings available under each tab:
General Detail, Orientation, AutoZoom, Map Colors
Source Basemap, Data Card Maps
Waypoints Waypoints, Active Route
Points Spot Soundings, Tide Stations, Services
Nav Line Heading Line, Bearing Line, Course Line
Track Saved Tracks, Track Log
Other Accuracy Circle, Lat/Lon Grid, Map Outlines
To change a map setup feature:
1. Press the ‘Set Up Map’ SOFT KEY.
2. Move LEFT or RIGHT on the ARROW KEYPAD to highlight the desired tab, then UP or DOWN on the
ARROW KEYPAD to highlight the setting you want to change and press ENTER/MARK.
3. Move UP or DOWN on the ARROW KEYPAD to highlight to the desired setting and press
ENTER/MARK. To exit, press QUIT.
General Tab
Detail— Most, More, Normal, Less, Least: controls how much map detail you will see. This setting only
applies to any map feature set to “Auto”. Those features which have a specifi ed scale or turned “Off”
are unaffected by this setting.
Distance and
Bearing
Map
Cursor
Full screen map shown
Cursor
Coordinates
Main Menu—Map Confi guration Tab
