24
Reference
Highway Page options
F
The GPSMAP 2006/2010’s Highway Page features SOFT KEY options that provide access to functions
and features relating to the Highway Page and the layout options. Options allow you to defi ne the data
fi elds to display several data options and select which waypoints and tracks are displayed on screen. Press
the corresponding SOFT KEY to activate the desired option.
• Change Nmbrs— allows you to specify the type of data displayed in each data fi eld used on the
Highway Page and to display additional data fi elds. For detailed instructions on changing the data fi elds
and layout of the Highway page, see pages 16-18.
If you change a data fi eld to ‘Highway’, you can change the Highway scale for the Highway
data fi eld by pressing the IN or OUT key while the cell is highlighted in “Change Nmbrs”
mode.
• Hide/Show Nmbrs— toggles between a Highway Page without or with data fi elds on the display.
To maximize the Highway Page/show data fi elds:
1. Press the ‘Hide Nmbrs’ SOFT KEY. The Highway Page will now be maximized with no data fi elds.
2. To show the data fi elds again, press the ‘Show Nmbrs’ SOFT KEY.
• Set Up Hwy (Highway)— allows you to select what waypoints and tracks are shown on the Highway
display. Use the
ARROW KEYPAD
and
ENTER/MARK
key to select/deselect the desired options. Four
options are available:
• Active Route Waypoints— all active route waypoints.
• User Waypoints— only nearby waypoints to the route.
• Track Log— current active track log.
• Saved Tracks— any saved track logs near the route.
Active Route Page
Whenever you have activated a route in the GPSMAP 2006/2010 system, the Active Route page will
show each waypoint of the active route, along with various, user-selectable types of data. For additional
details on the Active Route Page, see page 42.
Active Route Page
Check or uncheck the options you wish to show/not show on the
Highway Page.
