55
Reference
You may also choose from one of the following SOFT KEY options:
• All Pages— selects all pages.
• Chart Plotter— selects Map page only.
• Nav Tools— selects Compass, Numbers, Highway, and Active Route pages only.
• Defaults— selects all pages.
To ‘Jump To’ a specifi c page:
1. Use the ARROW KEYPAD to highlight the ‘Jump To’ option to the right of the desired page and press
ENTER/MARK.
To set the First Page:
1. Use the ARROW KEYPAD to highlight the ‘First page’ option and press ENTER/MARK. Highlight the page
you wish to appear fi rst and press ENTER/MARK.
System tab— controls system setting for beeper, speed fi lter, languages, system mode, simulator controls,
restores factory settings, and displays system information.
The following settings are available:
• Beeper— controls audible beep. Select from ‘Off’, ‘Alarms Only’ (sounds for alarms/messages), ‘Key
and Alarm’ (sounds for key presses and alarms/messages).
• Speed Filter— averages speed-readings. Choose from ‘Off’, ‘Auto’ (automatically controls fi ltering),
or ‘On’ (allows you to enter a value from 1 to 255 seconds).
• Language— select from various languages for the unit’s on-screen display.
• System Mode— select from ‘Normal’ (Normal Navigation) or ‘Simulator’ (For practice ONLY)
• Current Time/Date*— lets you enter a current time and date.
• Track Control*— ‘Auto Track’ will steer to the current navigation point. ‘User Track’ allows you
to enter a heading in the ‘Track’ fi eld.
• Speed*— lets you enter a speed.
• Track*— lets you enter a heading.
• Set Position*— SOFT KEY option allows to set your location while in simulator mode. Press the
‘Set Position’ SOFT KEY, then point to the desired position on the map and press ENTER/MARK.
* These fi elds will only appear in the “Simulator Setup” window when the unit is in Simulator Setup Mode.
Pages Tab
Retail Demonstration Mode will restore the factory
settings to the unit if left unattended for over 2
minutes. This mode should be used for display
purposes. User waypoints will NOT be deleted.
Main Menu: Pages/System Tabs
