12
1212
12
3. In the
Program Manager
window, click
Run
from the
File
menu.
4. At the command line box, type the letter of the CD-ROM drive followed by
\WIN31\PCL3\<Language>\SETUP.EXE. Substitute the appropriate three-
character language code (found in the table below) for <Language>.
Language Abbreviation Language Abbreviation
Danish DAN Italian ITA
Dutch DUT Norwegian NOR
English ENU Polish POL
Finnish FIN Portuguese POR
French FRE Spanish SPA
German GER Swedish SWE
5. Follow the instructions that appear on the screen to complete the printer
software installation.
Installing on MS-DOS
The printer comes with a configuration utility called DJPMenu that allows you to
define or change the settings on the HP DeskJet 350 series printer if your MS-DOS
applications do not allow you to do so.
Note:
You do not need to install the DJPMenu software if you are printing from your
Microsoft Windows 3.1x applications.
Use the following procedure to install and run the printer configuration utility:
1. Make sure that the printer is connected directly to the parallel port of your
computer. (The DJPMenu software requires this.)
2. Insert the installation floppy disk into drive A.
3. At the MS-DOS prompt (A:\>) type INSTALL, and press ENTER.
4. Follow the instructions that appear on the screen to complete the printer
software installation.
5. To run the DJPMenu software, type C:\DESKJET\DJPMENU at the MS-DOS
prompt.
Note:
For more up-to-date information on the DJPMenu software, please refer to the
Readme.txt file, which you have just installed.
