A SERVICE OF

logo

Q1860-90918 6 Removing and replacing parts 143
Tray 2 separation pad
Note This procedure applies to Tray 2 and to any optional 250-sheet tray.
1 Remove the paper from the tray.
Note Callout 1 in figure 73 shows a detail of the separation pad.
2 While pressing down the paper lift plate (callout 2), reach under the front of the tray and
squeeze the black tabs (callout 3 in figure 74) to release the separation pad from the tray.
Figure 73. Tray 2 separation pad removal (1 of 2)
Figure 74. Tray 2 separation pad removal (2 of 2)
3 Pull the spring off of the old separation pad, and then insert the spring onto the new
separation pad.
4 Replace the separation pad.
2
2
1
2
2
3
www.GovTechMedia.com