A SERVICE OF

logo

Q1860-90918 6 Removing and replacing parts 159
Registration assembly
1 Remove the top cover (see page 115), the left side cover (page 123), the pickup gear
assembly (page 136), the main gear assembly (page 134), and the transfer guide (page 128,
steps 1 and 2).
2 Release the e-ring (callout 1) that is on the registration assembly clutch, and remove the
clutch.
Figure 92. Registration assembly removal (1 of 2)
3 Remove two screws in the top, middle of the printer (see figure 76 on page 145, callout 1).
Note These screws are already removed if you have removed the paper-feed roller assembly. They are
common to both the paper-feed roller assembly and the registration assembly.
2
1
www.GovTechMedia.com