
••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••
31
USING PAPER, CARDS, ENVELOPES, TRANSPARENCIES, AND LABELS
••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••
Using Standard Size Paper
Use this procedure to print on standard size paper or
transparency film with your HP DeskJet 670C Series printer.
Paper and transparency sizes that are considered standard are:
U.S. Letter (8.5 x 11 inches) and U.S. Legal (8.5 x 14 inches).
1. Slide the paper width adjuster to its leftmost position.
2. Pull out the paper length adjuster.
N OTE
Make sure the card guide (used when printing on index cards and postcards) is in
the down position. (See the drawing on page 36 in the procedure Using Index
Cards and Postcards for the location of the card guide.)
3. Remove up to approximately
1
/
2
inch (1 cm) stack of paper from
the packaging. Fan the edges of the paper stack to separate the
pages. Then tap the short edge of the stack on a flat surface to
even the stack.
2184037
Paper Width
Adjuster
Paper Length
Adjuster
2162040