A SERVICE OF

logo

EN Top assemblies 95
4 Using needlenose pliers, pull the bottom of the bushing out (Figure 6-24, callout 1), then turn it
counter clockwise to release it (Figure 6-24, callout 2).
Figure 6-24 Pickup Roller Assembly removal (2 of 2)
5 Lift the bushing out.
6 From inside the front of the printer, slide the right side of the Pickup Roller Assembly forward,
then lift the left side out.
1
2
Service.book Page 95 Thursday, September 14, 2000 11:15 AM