A SERVICE OF

logo

Chapter 2 Printing Tasks 109
Using the Stapler
Selecting the Stapler from the Control Panel
If your software does not support stapling, set it using the directions below.
1 Press Menu repeatedly until PAPER HANDLING MENU appears.
2 Press Item repeatedly until PAPER DEST= STANDARD OUTBIN * appears.
3 Press + repeatedly until PAPER DEST= OPTIONAL BIN x appears. (See pages
103
and 104 to choose the appropriate bin according to the mode you are
using.) Your network administrator may have changed the name of this bin.
For example, it may be called STAPLER.
4 Press S
ELECT
to save your choice. An asterisk (*) appears next to your
selection.