Appendix B Control Panel Menus 365
Paper Handling Menu
[TYPE]=NORMAL NORMAL
LOW
HIGH1
HIGH2
HIGH3
This item appears only when CONFIGURE FUSER MODE
MENU=YES. The printer speeds are for Letter or A4.
NORMAL: Normal temperature, prints at 32 ppm.
LOW: Low temperature, prints at 32 ppm.
HIGH1: Raises the temperature, prints at 32 ppm.
HIGH2: Raises the temperature, prints at 24 ppm.
HIGH3: Raises the temperature, prints at 16 ppm.
Most paper types are set to NORMAL by default. The
exceptions are as follows:
TRNSPRNCY=LOW
LABELS=HIGH1
CARDSTOCK=HIGH2
ROUGH=HIGH1
For a complete list of supported paper types, see page
335
.
CAUTION
If you change the fuser mode to HIGH1, HIGH2, or HIGH3,
be sure to change it back to the default when you are
done printing. Setting a paper type to HIGH1, HIGH2, or
HIGH3 might shorten the life of some consumables,
such as the fuser, and might cause other failures or
jams.
Item Values Explanation
