136 MFP disassembly/assembly ENWW
Changing the control panel
attachment angle and
removing/reinstalling
CAUTION Be sure the power cord has
been unplugged from the
wall outlet.
Procedure
1 Open the front left door and front right
door.
2 Remove two screws to remove the control
panel cover (middle).
3 Remove two screws to unlock the control
panel.
4 When changing the control panel
attachment angle, align the control panel
stopper with the stopper hole at the front
side on the bottom of the control panel
and fasten using two screws in the
operation cover attachment holes.
CAUTION To remove the control
panel, skip this step and
proceed to step (5).
CAUTION When the attachment
angle of the control panel
is changed, the control
panel cover and two
screws will become
unnecessary.
