A SERVICE OF

logo

Connect a USB cable as follows:
1. Disconnect the USB cable from the rear of your printer if it is already connected.
2. Press the POWER ON/OFF key (1) on the front panel to turn the printer off.
NOTE Only turn off the printer while PRINTER READY is displayed on the front panel
except in an emergency. Do not turn off the printer while INITIALIZING or CLEANING is
displayed on the front panel to avoid liquid dripping onto other parts of the printer and
damage to the printhead.
3. Power off the printer using the power switch (1) at the rear.
4. Connect the USB cable to a USB connector on your computer.
12 Chapter 2 How do I… (basic operation topics)? ENWW
How do I… (basic operation
to
p
ics
)
?