A SERVICE OF

logo

NOTE When printing without using the take-up reel, make sure the media or printing surface is
not damaged or folded by the take-up reel sensor.
Define the take-up reel winding mode
The take-up reel supports two winding modes; tension winding and loose winding.
NOTE Normally the LOOSE winding mode is recommended.
NOTE Use the TENSION winding mode when there are problems with skew.
1. Press the ONLINE key to view the MEDIA REG menu.
2. Press to select MEDIA REG.
3. Press
to scroll to the TUR MODE option and press OK to select.
4. Select LOOSE or TENSION and press OK to confirm.
ENWW Use the take-up reel 47
How do I load/unload media