A SERVICE OF

logo

Open as PDF
next previous
Hardware options installation 71
5.
Install the dedicated iLO 2 management port module.
6. Using a T-15 Torx screwdriver, secure the dedicated iLO 2 management port module.
7. Install the access panel.
8. Do one of the following:
o Close or install the tower bezel, as needed.
o Slide the server back into the rack.
9. Connect a network cable to the module, as needed.
10. Power up the server (on page 20).
HP Trusted Platform Module option
Use these instructions to install and enable a TPM on a supported server. This procedure includes three
sections:
1. Installing the Trusted Platform Module board (on page 72).