A SERVICE OF

logo

ze1000 Series Troubleshooting and Self-Repair Guide Removing and Replacing Parts 37
Removing the Keyboard Cover
Table 4. Keyboard Cover Replacement Part Numbers
Description Part Number Exchange Part Number
Cover, keyboard F3410-60913
Required Equipment
#0 Phillips screwdriver.
Small flat-blade screwdriver.
Removal Procedure
1.
Unplug the AC adapter, if present, and remove the battery.
2.
Use the flat-blade screwdriver to carefully pry up the right end of the keyboard cover, just above
the Delete key, then lift the cover off of the notebook.
Figure 12. Removing the Keyboard Cover
Reassembly Notes
Insert the tabs on the left end of the cover into the slots in the notebook’s case, then gently press
along the length of the cover to snap it into place.