Version 1.2 Page 41 4/22/04
At each prompt you may type DEFAULT to set default configuration or Q to Quit
Current LAN Configuration:
- - MAC Address : 0x00306e397dd2
I - IP Address : XX.XX.XX.XXX
H - MP Host Name : uninitialized
S - Subnet Mask : 255.255.255.0
G - Gateway Address : XX.XX.XX.XXX
L - Link State : Auto Negotiate
W - Web Console Port Number : 2023
Enter parameter(s) to change, A to modify All, or [Q] to Quit: i
For each parameter, enter:
New value, or
<CR> to retain the current value, or
DEFAULT to set the default value, or
Q to Quit
IP Address:
Current -> XX.XX.XX.XXX
127.0.0.1 (default)
Modifying this parameter will cause all present LAN and Web
connections to be dropped.
Enter new value, or Q to Quit: 127.0.0.1 (specify 127.0.0.1 or say DEFAULT)
-> IP Address will be updated
New LAN Configuration (* modified values):
- - MAC Address : 0x00306e397dd2
+ I - IP Address : 127.0.0.1
H - MP Host Name : uninitialized
+ S - Subnet Mask : 255.255.255.0
+ G - Gateway Address : XX.XX.XX.XXX
L - Link State : Auto Negotiate
W - Web Console Port Number : 2023
+ indicates inconsistent parameters
Enter parameter(s) to revise, or [Q] to Quit: G
For each parameter, enter:
New value, or
<CR> to retain the current value, or
DEFAULT to set the default value, or
Q to Quit
Gateway Address:
Current -> XX.XX.XX.XXX
127.0.0.1 (default)
Enter new value, or Q to Quit: 127.0.0.1 (specify 127.0.0.1 or say DEFAULT)
-> Gateway Address will be updated
