Operating the workstation blade 16
• Applications that depend on detection of the NVIDIA graphics adapter-The iLO 2 Remote Console
and Local I/O Cable environments both require that the ATI video controller is displaying the
Windows® desktop. If application installation depends on detection of the NVIDIA graphics
adapter, an incorrect installation might result.
• Using RDC—If application installation depends on detection of the NVIDIA graphics adapter, an
incorrect installation might result.
• Application installations that require a midway reboot-Both the Windows® RDC and RGS
environments terminate their connections when the blade reboots. If application installation requires
a midway reboot, RDC or RGS reconnection is required after the reboot.
After selecting the application installation method, install the applications using the installation process
specified by each application.
Verifying functionality
1. Launch the workstation blade applications from the client computer.
2. Verify the applications work correctly, and provide the functionality, performance, and interactivity.
Integrating additional workstation blades and client
computers
To ensure that each added device operates correctly with the existing solution components, HP
recommends that you perform verification after each workstation blade and client computer is installed.
For example, after integrating a new workstation blade into the solution, you can verify that RGS operates
between the new workstation blade and an existing client computer.
