A SERVICE OF

logo

Open as PDF
next previous
1. Map the external volume (A) as an internal volume (B) of the local storage system. Set the
emulation type as same as that of the copy source volume (C).
2. Check the capacity of the internal volume (B) where the external volume (A) is mapped. If the
capacity of the mapped external volume (B) is not same as the copy source volume (C), use
the VLL function to create a CV that has the same capacity as the copy source volume (C) out
of the volume (B).
3. Create a pair.
Figure 48 Copying Data to an External Storage System (Setting an External Volume as an S-VOL)
157