Adjustment of Equalizer type at PRO
Adjusting the effect of an Equalizer type selected
in 'Equalizer Control' when 'Equalizer mode' is
Refer to 'Equalizer Control' (page 11) to
select the Equalizer type.
Select the item for adjustment
Press the [FM+] or [AM–] button.
Each time the button is pressed, the items that
can be adjusted switch as shown below.
According to the Bass Q Factor setting value, the
frequencies that can be set in Bass Center Frequency
When the Bass Extend is set to ON, low frequency
response is extended by 20%.
Exit the Equalizer Control mode
Press the [EQ] button for at least 1 second.
When operation stops for 10 seconds, the
Equalizer type at that time is registered and the
Equalizer Control mode automatically closes.
Memory preset of adjustment of
The 'Adjustment of Equalizer type at PRO' can be
Refer to 'Adjustment of Equalizer type at
PRO' (page 12) to adjust the Equalizer type.
Preset the adjusted value
Press the [1] — [3] button for at least 1
Recalling a setting value
Enter the Equalizer Control mode
If "EQ EASY" is displayed, refer to 'Equalizer mode'
(page 24) to set the mode to "EQ PRO".
Press the [1] — [3] button.
Selecting the Movie display.
Enter the Movie Select mode
Press the [MOVIE] button for at least 1
Press the [MOVIE] button.
Each time the button is pressed, the Movie
