Putting the station in the memory.
Press the [FM+] or [AM–] button.
Select the frequency to put in the memory
Put the frequency in the memory
Press the desired [1] — [6] button for at least
The preset number display blinks 1 time.
On each band, 1 station can be put in the
memory on each [1] — [6] button.
Putting a station with good reception in the
Select the band for Auto Memory Entry
Press the [FM+] or [AM–] button.
Press the [FNC] button for at least 1 second.
Select the Auto Memory Entry mode
Press the [FM+] or [AM–] button.
Select the "A-Memory" display.
When 6 stations that can be received are put in
the memory Auto Memory Entry closes.
Calling up the stations in the memory.
Press the [FM+] or [AM–] button.
Press the desired [1] — [6] button.
Changing the tuning frequency step.
The original setting is FM band 50 kHz, and AM
Press the [SRC] button for at least 1 second.
Switch the frequency step
While pressing the [1] and [5] button, press
The frequency step changes to FM band 200 kHz,
When the same operation is repeated, it returns to the
When the frequency step is switched, the frequencies
in the memory are deleted.
