Section 7 COPIER MANAGEMENT
7-7
7
Press the Enter key.
8
Use the numeric keys on the keypad to enter the new copy
limit for that department code.
The copy limit can be set to any 1 page increment between
1 and 999,999.
NOTE
Enter “0” if you want to enable unlimited copying under that
department code.
9
Press the Enter key.
The display will return to the screen in step 6.
NOTE
If you want to change the copy limit for another department code,
repeat steps 6 through 9.
10
Press the Stop/Clear key.
The message display will return to the screen in step 4.
11
Use the M cursor key to select “z End” and then press the
Enter key.
The message display will return to the screen in step 2.
Inch specifications
Metric specifications
12
Use the M cursor key to select “z End” once again and then
press the Enter key.
The message display will return to the “Ready to copy.”
screen.
Inch specifications
Metric specifications
● Clearing copy counts
1
Display the “Copy Management” screen. (See page 7-3.)
2
Use the M cursor or the N cursor key to select
“x Management Setting” [“x COPY MGMT SETTING”].
Inch specifications
Metric specifications
3
Press the Enter key.
4
Use the M cursor or the N cursor key to select “b Delete
Count” [“b COUNTS CLEAR”].
Inch specifications
Metric specifications
5
Press the Enter key.
Inch specifications Metric specifications
