Black 0029
Black0029
FIRE SIREN TIME
◆
The factory-set fire siren time is five minutes.
◆
The fire siren time can be adjusted from one to
30 minutes.
AUTOMATION OUTPUT TIME
◆
The factory setting causes the Automation Output
to toggle between on and off with each activation.
◆
The Automation Output can be programmed to
turn on, then automatically turn off after one to
2500 seconds (42 minutes).
REMOTE CONTROL ARMING LEVEL
◆
The factory setting causes the portable remote
controls to arm to the Away Mode.
◆
Alternately, the portable remote controls can
arm to the Home Mode.
◆
Changing this setting will affect all the portable
remote controls used with the system.
REMOTE CONTROL DISARMING LEVEL
◆
The factory setting causes the portable remote
controls to disarm to the Off Mode.
◆
Alternately, the remote controls can disarm to
the Chime Mode.
◆
Changing this setting will affect all the portable
remote controls used with the system.
ENTRY DELAY BEEPS
◆
The factory setting causes the Console to beep
during Entry Delays.
◆
Alternately, the Entry Delay beeps can be silenced.
◆
With the Entry Delay beeps off, the Console will
be silent after a delayed sensor is triggered until
the Entry Delay expires, then the alarm siren will
sound.
EXIT DELAY BEEPS
◆
The factory setting causes the Console to beep
during Exit Delays.
◆
Alternately, the Exit Delay beeps can be silenced.
◆
With the Exit Delay beeps off, the Console will be
silent after arming to the Away Mode until the
Exit Delay expires, then a single “gong” tone will
sound.
3
DEF
2
ABC
HOME
AWAY
TIME IN MINUTES (1-30)
PROGRAMMING STEP #32
PROGRAM
STORE PROGRAM
4
GHI
0
HOME
AWAY
TIME IN SECONDS (1-2500)
0 = TOGGLE ON & OFF
PROGRAMMING STEP #40
PROGRAM
STORE PROGRAM
5
JKL
0
HOME
AWAY
PROGRAMMING STEP #50
PROGRAM
STORE PROGRAM
2 FOR HOME MODE
3 FOR AWAY MODE
5
JKL
1
HOME
AWAY
PROGRAMMING STEP #51
PROGRAM
STORE PROGRAM
0 FOR OFF MODE
1 FOR CHIME MODE
6
MNO
1
HOME
AWAY
PROGRAMMING STEP #61
PROGRAM
STORE PROGRAM
0 FOR ENTRY BEEPS OFF
1 FOR ENTRY BEEPS ON
6
MNO
2
ABC
HOME
AWAY
PROGRAMMING STEP #62
PROGRAM
STORE PROGRAM
0 FOR EXIT BEEPS OFF
1 FOR EXIT BEEPS ON
27
