Connect the Headset (Optional) 21
E-EQ-MX6OGWW-E-ARC MX6 User’s Guide
Connect the Headset (Optional)
The MX6 audio jack is located on the side of the unit next to the scan aperture and the SDA door
(Secure Digital Access). The internal speaker is disabled when the audio jack is connected.
Figure 17 Audio Jack Location
Lift up the protective audio jack cover and insert the barrel end of the connector into the MX6
audio jack and push in firmly.
Note: The audio option draws power from the main battery Pack.
Adjust the Headset Controls
Access: Start | Settings | Personal tab | Headset
Figure 18 Headset Control
Select either stereo headphone or telephone. If telephone, use this screen to adjust the microphone
volume. Move the slider from mute to high until the volume in the headphones is satisfactory.
Note: Version 7.03 does not have a Headset option. Headset options are available in later
versions.
