11
Before Using
Connections
Other Information
Operations
1 Connection with the Amplifier
Connect the ANALOG OUTPUT connectors on the rear panel of C-701A and the amplifier’s CD
input connectors using the audio connection cable. Refer to the amplifier’s instruction manual for
connections.
2 Connection to DIGITAL OUTPUT connector
Using the DIGITAL OUTPUT connector, you can record on digital audio equipment, such as an MD,
CD-R, DAT, etc. For digital recording, connect the equipment to either DIGITAL OUTPUT OPTICAL
connector using the optical cable (option). These connectors can also be used for connecting an
amplifier which is equipped with a digital input connector.
A connector protection cap is attached to the digital output connector. Re-
move this cap to connect the unit to other digital equipment. When you are
not using the digital output connector, replace this cap.
3 AC OUTLET (UNSWITCHED)
The AC power cord of another compo-
nent can be connected to this AC OUT-
LET connector.
This means that if the C-701A is plugged
into an AC outlet, AC power is available
to this AC OUTLET even if the C-701A is
off.
The shape and capacity of the AC outlet
may differ depending on the area of pur-
chase. Make sure that the capacity of other
components connected to this unit does
not exceed the capacity that is printed on
the rear panel.
L
R
ANALOG
OUTPUT
DIGITAL
OUTPUT
REMOTE
CONTROL
OPTICAL
MODEL NO.
C
-
701A
RATING
:
AC 230-240
V
50
Hz 8
W
COMPACT
DISC
PLAYER
AC OUTLET
AC 230-240
V 50
Hz
UNSWITCHED
100
W MAX.
Capacity is
120 watts.
120 V, 60 Hz models
230-240 V, 50 Hz and
220-240 V, 50/60 Hz
models
Capacity is
100 watts.
L
R
ANALOG
OUTPUT
DIGITAL
OUTPUT
REMOTE
CONTROL
OPTICAL
MODEL NO. C
-
701A
RATING
:
AC 230-240
V
50
Hz 8
W
COMPACT
DISC
PLAYER
AC OUTLET
AC 230-240
V 50
Hz
UNSWITCHED
100
W MAX.
LR
connector
Amplifier without
digital input terminal
MD recorder, CD recorder,
DAT deck, etc.
To wall outlet
Optional Optical
fiber cable
DIGITAL IN
Audio
connection
cable
CD
cable
1
2
3
Connections
