13
Before Using
Connections
Other Information
Operations
Playing CDs
Operations
Normal play
1 Press STANDBY/ON button to turn
on the unit.
The STANDBY indicator goes off, and the dis-
play will light up.
2 Press the (OPEN/CLOSE) button
to open the disc tray.
3 Put the disc in the
disc tray, with its
label side facing up.
4 Press the button to close the disc
tray.
5 Press the button.
The CD player starts playing the first track
(track 1).
COMPACT
DISC
PLAYER
DISPLAY
C
-
701
A
STANDBY
/
ON
STANDBY
STANDBY/ON
REPEAT
STANDBY/ ON
TAPE
TAPE REW TAPE FF
SLEEP TIMER ENTER
CLOCK
MODE
CLEAR
SCROLL
CDR/PC
CD/ DVD
MD FM AM
ACOUSTIC
PRESENCE
INPUT SELECTOR
TAPE
CDR
CD/DVD
MD
V
O
L
U
M
E
MUTING
4
2
3
1
UP
DOWN
STANDBY/
ON
(Supplied with R-801A)
Disc tray
Remote controller
Remote controller
Remote controller
• If the
button is pressed when the unit is
in STANDBY mode, it turns on automatically
then starts playing the CD, if it is loaded in the
disc tray. Your tuner amplifier also turns on if it
is an Onkyo R-801A (refer to page 8).
If the CD player does not start playing when
the
button is pressed
• The disc may be upside down in the tray. Press
the
button to open the disc tray. If you can-
not see the label on the disc, turn the disc over,
label side up.
• Moisture may have formed inside the CD player.
Remove the CD from the disc tray and leave
the power on for about one hour to evaporate
the moisture.
To stop playing
Press the
button.
To pause playing
Press the
button or the or button on
the remote controller. (The PAUSE indicator lights.)
To resume play, press the
button.
STANDBY
STANDBY/ON
Label side
RC-466S
Note
You can skip this step by pressing the
button instead of the button. In this case,
the disc tray closes automatically and Track 1
starts playing.
Remote controller
STANDBY/ ON
or
