9
Before Using
Connections
Other Information
Operations
Using the remote controller
The unit is not shipped with a remote controller.
However, you can use a remote controller (RC-
466S) that is shipped with the R-801A.
Remote controller RC-466S
When the remote controller RC-466S supplied with
the R-801A is used, operate the remote controller
pointing towards the R-801A’s remote sensor.
Be sure to make the
connection securely. If
the connection is incomplete, you cannot use the
remote controller to operate the unit.
Remote control
sensor
30°
5m
30°
C-701A
R-801A
RC-466S
Notes
• Place the unit away from strong light such as
direct sunlight or inverted fluorescent light which
can prevent proper operation of the remote
controller.
• Using another remote controller of the same
type in the same room or using the unit near
equipment which uses infrared rays may cause
operational interference.
• Do not put any object such as a book on the
remote controller. The buttons of the remote
controller may be pressed by mistake and drain
the batteries.
• Make sure the audio rack doors do not have
colored glass. Placing the unit behind such doors
may prevent proper remote controller operation.
• If there is any obstacle between the remote con-
troller and the remote control sensor, the re-
mote controller will not operate.
