To make a programmed recording, your video recorder needs
to know:
• the date you want to makethe recording;
• the programmenumber of the TV channel you want to record;
• the start and stop timeof the recording;
• whether you wantto use VPS or PDC (see below); and
• the recording speed(SP or LP).
The video recorder stores allthis information in a TIMER block.
You can programme up to six TIMER blocksa month in advance.
VPS (video programming system) and PDC
(programme delivery control)
With VPS and PDC, the TV station controls the start time and
length of the recording. This means that the video recorder
switches itself on and off at the right time, even if a TV
programme you want to record begins earlier or finishes later
than expected.
Usually the start time is the same as the VPS/PDC time. But if
your TV guide gives a VPS or PDC time which is different to the
programme’s start time (for example, 20.15 and VPS 20.14), you
must enter ’20.14’ as the start time.
If you want to programme a time that is different from the VPS
and PDC time, you must switch off VPS and PDC.
DWith most TV stations the VPS and PDC time are always
the same as the start time.
Programming with VIDEO Plus+
All the information your video recorder needs is contained in
the PlusCode programming number.
a Switch on the TV set and select the programme number
for the video recorder.
b Press the TIMERs button on the remote control.
c Select the line ’VIDEOPLUS PROGRAMMING’ with the
menu buttons P = or P ; and confirm with the
OK button.
d Use the number buttons on the remote control to enter
the PlusCode number printed in your TV guide.
If you make a mistake, you can clear your instructions
with the CLEAR (CL) button.
TIMER
VIDEOPLUSPROGRAMMING
12345678
________________________________
MO-FR/WEEKLY TOSTORE
PRESS SELECT PRESS OK
e Use the SELECT button to select daily or weekly
programming.
’MO-FR’ record every day from Monday to Friday.
’WEEKLY’ record every week on the same day of the
week.
f Confirm with the OK button. Your programming details
will then appear on the TV screen.
DIf VIDEO Plus+ does not recognize the TV channel,
’PLEASE ENTER PROGRAMME NUMBER’ will appear on
the TV screen. You can select the programme number
with the P ; or P = button.
Then confirm with the OK button.
DIf ’PLUSCODE NUMBER WRONG’ appears on the TV
screen, this means you have entered an incorrect
PlusCode number or the incorrect date. Correct your
instructions or end with the TIMERs button.
DIf ’WEEKEND PROGRAMMING - NOT POSSIBLE’ appears
on the TV screen, this means you have entered an
incorrect date. You can only use daily programming for
recordings from Monday to Friday.
DUnder ’START’, use the SELECT button to switch VPS and
PDC on or off.
DUnder ’END’, use the SELECT button to select the
recording speed SP or LP.
g Confirm with the OK button.
DThe programming information has been stored in a TIMER
block.
h To end, press the TIMERs button.
i Make sure that the cassette you have put in can be
recorded on.
j Switch off the video recorder with the
mSTANDBY button.
4. Programmed recording
12
