21
Chapter 1 Selecting and Playing a Sound
Chap.1
Selecting Patches and Rhythm
Sets from an External MIDI
Device
By receiving MIDI messages, the XV-5080 can switch Patches
(including the Patches for each Part of a Performance) or
Rhythm Sets.
In Patch or Rhythm Set modes
1. Press [PATCH] — or [RHYTHM] if you wish to select a
Rhythm Set — to make the button’s indicator light.
2. Set the transmission channel of your external MIDI
device to match Patch Receive Channel (p. 212), the XV-
5080’s MIDI reception channel.
To learn about the MIDI settings of your external MIDI
device, see its owner’s manual.
3. Transmit the appropriate Bank Select MSB (Controller
#0) value to the XV-5080.
If the value is “87,” a Patch is selected. If the value is “86,” a
Rhythm Set is selected.
4. Transmit the appropriate Bank Select LSB (Controller
#32) value to the XV-5080.
5. Transmit the Program Change value corresponding to
the Patch or Rhythm Set.
The desired Patch or Rhythm Set will be selected on the XV-
5080.
* When the XV-5080 receives only Program Change messages
without receiving Bank Select messages, it will switch to the
corresponding Patch or Rhythm Set from the currently
selected group or bank.
The Patches and Rhythm Sets in each library correspond to
Bank Select numbers as follows.
Patches
Patch Patch Bank Select Program
Group Number Number Number
MSB LSB
USER 001–128 87 00 001–128
PR-A 001–128 87 64 001–128
PR-B 001–128 87 65 001–128
PR-C 001–128 87 66 001–128
PR-D 001–128 87 67 001–128
PR-E 001–128 87 68 001–128
PR-F 001–128 87 69 001–128
PR-G 001–128 87 70 001–128
CD-A 001–128 87 32 001–128
:::::
CD-H 001–128 87 39 001–128
XP-A *1 *1 *1 *1
:: : ::
XP-H *1 *1 *1 *1
* 1 Depends on the Wave Expansion Board installed.
Fixed Bank Select numbers are assigned to the Wave
Expansion Board itself.
Patch Patch Bank Select
Group Number Number
MSB LSB
SR-JV80-01 001–128 89 00
SR-JV80-01 129–256 89 01
SR-JV80-02 001–128 89 02
SR-JV80-02 129–256 89 03
:
SR-JV80-65 001–128 91 00
SR-JV80-65 129–256 91 01
