240 WAVE EDIT MODE / EDIT
1: WAVE ASSIGN
2: WAVE NAME
[SHIFT]+[UTILITY] → [SYNTH SETUP] → [MENU] → 1:Waveform → [ENTER/YES] →
→ [ENTER/YES] → [MENU] → 1:Assign → [ENTER/YES]
→ 2:Name → [ENTER/YES]
After pressing the [SYNTH SETUP] SUB MODE key (actually the [EDIT] key in
the WAVE mode), the PAGE [ ] and [ ] keys can be used to select the entry
display for the WAVEFORM EDIT or SAMPLE EDIT functions. Select “WAVE-
FORM EDIT”.
F1
CS1
F2
CS2
F3
CS3
F4
CS4
F5
CS5
F6
CS6
F7
CS7
F8
CS8
From this entry display press [ENTER/YES].
Press [EXIT/NO] when you’re ready to exit from the WAVEFORM EDIT
mode.
● 1: WAVE ASSIGN
If not already selected, press the PAGE [ ] key to select this screen.
This function assigns the selected sample(s) to a “waveform”. A waveform
can consist of anywhere from 0 to 63 samples. The SAMPLE EDIT functions
described below allows each sample assigned to a waveform to be mapped to a
specific range of the keyboard, as well as allowing the volume, pitch, and loop
characteristics of each sample to be set individually.
ON, OFF
Range: ON, OFF
Controls: [F1], [F2]
F1
CS1
F2
CS2
F3
CS3
F4
CS4
F5
CS5
F6
CS6
F7
CS7
F8
CS8
